返回主站|会员中心|保存桌面|手机浏览
普通会员

保定建信模具制造有限公司

模具制造, 塑料制品, 金属制品批发, 零售

新闻中心
  • 暂无新闻
产品分类
  • 暂无分类
站内搜索
 
荣誉资质
  • 暂未上传
友情链接
  • 暂无链接
首页 > 供应产品 > 河北水泥检查井模具 实力工厂 科天模具
河北水泥检查井模具 实力工厂 科天模具
浏览: 69
品牌: 科天模具
单价: 500.00元/件
最小起订量: 1 件
供货总量: 999 件
发货期限: 自买家付款之日起 3 天内发货
有效期至: 长期有效
最后更新: 2022-04-21 23:21
 
详细信息

检查井模具,水泥检查井模具,检查井模具是按照客户所需求规格定制,按照检查井模具 水泥检查井模具在污水、雨水、排水、小区、市政等使用的原则来说。雨水检查井模具,污水检查井模具同属于检查井钢模具的范围,根据雨水检查井模具,污水检查井模具的尺寸以及规格定制的模板需要符合检查井构件的要求,保证工程能够使用到规格正确的模板。检查井模具正确操作步骤为先将内模放置好,然后放外模,再将混凝土灌入内外模中间的位置,使用小型进行震动,这样能够保证混凝土检查井外表的光滑度,在经过7-9小时晾晒就可以脱模了。在脱模的时候,先将雨水井的内模拆掉,然后再拆井体的外模,这样一套混凝土检井就做好了。

The model of inspection well mold and cement inspection well mold is Zhongze Shouzheng innovation in Baoding. The inspection well mold is customized according to the specifications required by customers. According to the inspection well mold, the cement inspection well mold is used in sewage, rainwater, drainage and small


According to the principle of district and municipal use. The rainwater inspection well mold and sewage inspection well mold belong to the scope of inspection well steel mold. The template is customized according to the size and specification of rainwater inspection well mold and sewage inspection well mold


It is necessary to meet the requirements of manhole components to ensure that the formwork with correct specifications can be used in the project. The correct operation steps of the inspection well mold are to place the inner mold first, then the outer mold, and then pour the concrete into the middle of the inner and outer mold


A small is used for vibration, which can ensure the smoothness of the surface of the concrete inspection well. It can be demoulded after 7-9 hours of drying. During demoulding, the internal formwork of the rainwater well shall be removed first, and then the well body shall be removed


So a set of concrete inspection wells can be completed.





询价单
在线客服系统