高速收费岛模具形状复杂,精度要求高,制造周期长,这也导致其加工费要超过模具的材料费用,并且材料也需选用原材料。模具加工要求按统一长度进行下料,外露面必须机切抛光,长度允许误差在20mm 范围内,而厚度、宽度、高度允许误差在2mm 范围内。未来的高速收费岛模具制造将要求拥有精度高、高硬度、程序处理能力强等特点,其配置和协调性更高于一般加工设备,与普通零件加工完全不同,是名副其实的好产品。
The mold of high-speed toll island has complex shape, high precision requirements and long manufacturing cycle, which also leads to
the processing cost exceeding the material cost of the mold, and the materials also need to use raw materials. Die processing requires
blanking according to the uniform length, and the exposed surface must be machined and polished. The allowable error of length is
within 20mm, while the allowable error of thickness, width and height is within 2mm. The future high-speed toll Island mold
manufacturing will require the characteristics of high precision, high hardness and strong program processing ability. Its
configuration and coordination are higher than ordinary processing equipment. It is completely different from ordinary parts
processing. It is a good product worthy of the name.