收费岛模具是由岛头和岛尾两部分组成，该模具的体型很大，并且形状不比较特殊，一般的小型模具厂是没有办法胜任该模具的制作任务的，因为该模具制作起来的比较复杂，需要一定的制作水平以及相应的辅助设备类来进行生产，该模具一般是在高速公路的收费处进行使用的，为了减小对预制块搬运的困难，
可以将模具搬运到现场来进行使用，也就是我们常说的现浇制作，再将收费岛模具制作完成后可以涂上一些鲜艳的颜色，比如说黑黄相间的就比较显眼，这样一是为了警示车辆收费站的位置，而是为了起到很好的防撞效果，使用这种现浇生产的方法能购使生产的产品快速投入到使用当中，不然特大号的混凝土件在搬运起来是非常的困难的，
另外也是为了避免在运输的过程中受到损伤，从而影响使用。由于收费岛模具的体型特大，所以要求模具的本身具有很好的抗压效果，所以3毫米
的钢板已经不足以用来支撑了，要采取五号毫米的钢板来作为该模具的主要加工材料。
The Feidao mold is composed of two parts: the island head and the island tail. The mold is very large and the shape is not special. General small mold factories can not be competent for the manufacturing task of the mold, because the manufacturing of the mold is complex and requires a certain manufacturing level and corresponding auxiliary equipment for production, The die is generally used at the toll office of the highway. In order to reduce the difficulty of handling the precast block,
The mold can be transported to the site for use, that is, we often say cast-in-situ production. After the mold of the toll island is completed, it can be painted with some bright colors. For example, the black and yellow ones are more conspicuous. This is to warn the location of the vehicle toll station, but to have a good anti-collision effect, Using this cast-in-situ production method can make the produced products quickly put into use, otherwise it is very difficult to carry oversized concrete parts,
In addition, it is also to avoid being damaged during transportation, thus affecting the use. Due to the large size of the toll Island mold, the mold itself is required to have a good compressive effect, so 3mm
The steel plate is not enough to support, so the steel plate of No. 5 mm should be used as the main processing material of the die.
13388663206